22.7 kg
NO COMPACTION
• Highly resistant and perfectly suited for installations where compaction is not possible or not traditionally used.
• Remains flexible and adapts to ground movements that could cause cracks, joint breaks or damage to the stones.
• Adheres strongly to the inner walls of pavers or stones without ever contracting.
Ideal for natural stone, pool surrounds, patios and sidewalks
• The first polymeric joint compound designed specifically for surfaces not suited to mechanical compaction.
• Can be used with a hard or concrete/sand base.
• Easy, fast and clean, the first true alternative to mortar and stone dust.
• For residential and commercial projects.
For joints measuring 6 to 100 mm (¼ to 4 in.) wide
• Specially selected sand for NOCO flows easily and evenly into joints.
• Techniseal's binder technology forms waterproof joints with high resistance to weed growth, insect infestation and erosion.
Coverage :
For a 22.7 kg bag :
Narrow joints : 60 to 120 square feet.Wide joints : 20 to 40 square feet.
For a more precise evaluation of the coverage, please refer to the product calculator at techniseal.com.
Storage and shelf life :
Unused bags can be stored outside if they are still on a pallet and protected by the original packaging.
Packaging :
Size : 22.7 kg bag
56 bags per pallet
Before you begin:
Due to the unique nature of this material, it is mandatory to protect the installation from rain for 24 hours after application. For larger joints or colder temperatures, 48 hours without rain may be required.
Installation conditions :
Temperature must be above 50°F (10°C) for 48 hours following installation.
• Surface and joints must be dry.
• Automatic watering system must be turned off.
Traffic :
Pedestrian: immediate
Vehicular: 48 to 72 hours. Block access during this period.
Tools needed :
• Semi-rigid bristle broom
• Leaf blower
• Spray gun and hose
• Soft bristle brush to smooth the joint before activation
Caution :
• Wear appropriate safety devices.
• Do not mix with cement, sand or any other material.
• Wait a minimum of 7 days after installation and make sure the joint is hard before cleaning and sealing the surface.
• Do not use on submerged or constantly wet surfaces.
• Since the product comes from a natural source, color and grain size may vary slightly.
IMPORTANT :
• Do not use this product to cover only the top of the joint.
• The use of cleaning equipment (e.g. high pressure cleaner) is restricted for the first 30 days. It should be noted that too direct and violent jets can create alterations, so it is preferable to consult the machine manufacturers in order to use the specific accessories with soft jets.
• Good maintenance is essential to keep the joints in optimal condition. Excessive moisture, shade, improper cleaning and maintenance, soil and organic matter (including grass clippings) left on the joints can contribute to the growth of moss or mildew and premature deterioration of the joint compound.
For more details on how to install this sand, please refer to the Techniseal website at www.techniseal.com
