Techniseal

RG+ Concrete Adhesive

296 ml

Quantity :

Techniseal® RG+ Concrete Adhesive is an elastomeric resin-based compound specially designed for exterior construction.
It remains flexible and is ideal for low wall construction.
It is very effective on dry surfaces, but can also be used on wet or frozen surfaces.
It provides a solid hold and resists the assaults of the climate (water, frost, etc.).

The RG+ adhesive meets or exceeds the following standards: ASTM D3498, APA AFG-01, ASTM C557

Keep out of reach of children

High performance formula
Can be applied on wet or frozen surfaces
Ideal for low wall construction

Type of product : Adhesive
Base product : Elastomer
Uses : Brick, Concrete paver, Stone

Coverage : 296 ml tube, 1 cm (3/8 in) bead covers up to 5 m (15 ft)

Storage :
Product should be stored in its original, unopened, tightly sealed container in a dry, well-ventilated area at controlled temperatures (5°C to 25°C). Keep out of the weather and direct sunlight.

Surface should be clean and ideally dry. Apply a maximum thickness of 3/8”; join pieces together immediately with a slight twisting motion. If surface is wet or frozen, curing will take longer

Cleaning of tools : Use mineral spirits.

Slit-Foam Roller
Slit-Foam Roller
Slit-foam Roller for solvent-based paver Protectors and Asphalt Protectors. Does not compress — Remains spongy. Allows uniform application.
StickyStone Adhesive
StickyStone Adhesive
600 ml
Information