Surefoot - Solvent-Based is an anti-slip additive that mixes easily with solvent-based protective film sealers such as WL4, WL1-2 and WL-87. It helps reduce the slippery nature of sealed pavers and slabs in areas prone to falls such as pool surrounds, ramps, etc.
Mixes easily with the sealer without changing its appearance
Prevents the risk of falls on slippery surfaces
Recommended for pool surrounds and sloped driveways
Keep out of reach of children
Type of product : Installation product
Type of surface : Concrete paver, Interlocking paver
Application :
For 3.78 L containers, add 5 spoonfuls of Surefoot.
For 18.93 L containers, add entire contents.
Spoon is included.
Do not add more than the recommended amount as this may affect the formation of the Protector film on the surface.
Packaging :
Size : 160 grams / 5.6 oz
6 units per box
Please refer to the technical data sheet of this product for complete information at www.techniseal.com.
Before you begin
Wear adequate protective clothing.
Always test on a small hidden area of approximately 4 square feet to ensure the results will meet your expectations.
Application
Add 5 spoons (spoon included) of Surefoot to 3.78 liters of Techniseal® Paver Protector (or entire contents of Surefoot to 18.93 liters).
Mix well with a stick.
Do not add more than the recommended amount, as it could affect the Protector’s film formation.
Apply Protector as directed on product’s label.
Stir Protector
Recoater occasionally during application to maintain the additive in suspension.