Various

Mortar 1.1.6

30 kg bag

Quantity :

Mortar 1.1.6 is a pre-mixed Type S mortar based on Type S hydrated lime and Portland cement mainly used for laying bricks, blocks, stones and other masonry products. It can be used indoors and outdoors. Its unique formulation gives it enhanced adhesion, handling and waterproof properties as well as exceptional resistance to freeze-thaw cycles. Mortar 1.1.6 complies with CSA A179-04 for N type mortar, with addition of water.

Recommendations :
The product should be placed on surfaces at temperatures between 5 ° C and 38 ° C. It must also maintain this temperature for 72 hours after application. Never add additives to modify product properties such as handling, setting time, etc.

Packaging :
This product is packaged in 30-kg bags and 1,500-lb.

Storage :
Store in a dry place protected from the weather. Unopened bags have a shelf life of 12 months. Product contaminated by water, moisture, or containing hard clods must be discarded.

Mixing : In a clean container, pour about 5 liters of water, and slowly add a bag of Mortar 1.1.6 stirring at low speed using a mixer. Mix for 3 to 5 minutes.

Application :
If the surrounding temperature is equal to or greater than 25 ° C, the mortar must be applied in less than 1½ hours after mixing, and in less than 2 ½ hours, if the temperature is below 25 ° C. Mortar unused after this time interval should be discarded. Protect from rain, sun and wind for the first 72 hours. Immediately after use, the tools should be cleaned while the product is still fresh. Finishing must be done as soon as the mortar loses its elasticity.

Precautions : Wash hands and skin when in contact with the product. The lime, cement and silica it contains can cause irritation to the skin and eyes. See the MSDS for first aid

Pre-Mix Mortar
Pre-Mix Mortar
30 kg bag
Adhesive Cement
Adhesive Cement
20 kg bag
Information