Techniseal® Professional-Grade Oil & Grease Remover is an industrial-strength oil and grease remover that lifts and absorbs embedded oil and grease stains
As it dries from a liquid to a powder. No scrubbing – No rinsing – No mess
Type of surface :
Natural Stone - Brick - Concrete Pavers - Concrete Slabs - Interior Concrete - Self-locking Pavers
Poured concrete - Stamped concrete - Wet Cast paving stone. Do not use on asphalt
Easy to use, Techniseal® Professional-Grade Oil & Grease Remover works without damaging or discolouring the material.
Keep out of reach of children
Size : 950 ml
6 units per box
Before you begin :
Important : Wear adequate protective clothing. ALWAYS TEST on a small hidden stain to ensure the results will meet your expectations. Do not use on asphalt. For best results, use when temperature is between 15°C and 25°C, and provide maximum ventilation. During hot summer days, apply product in the evening and let work overnight.
Application :
Shake well. Apply a generous amount of product to an oil or grease stain and let sit until product has turned to powder. With temperature above 15°C and good ventilation, this process should take between 5 and 8 hours. Process is slowed down and may be stopped at lower temperatures. When the product has completely dried to a powder, sweep up with a broom and dispose of the powder.
Note : Surface may still appear dark immediately after powder has been swept up. This is not oil but rather a citrusbased solvent that should evaporate within a few hours or days.
Note : This product dissolves sealants.